If you’re looking to elevate your kitchen design with a seamless and modern appliance, a Sharp Microwave Drawer Oven might be just what you need. Our innovative models offer a clean, built-in look, and advanced features, all while saving valuable counterspace. But before you buy, it’s essential to understand the proper microwave drawer dimensions to ensure a perfect fit.
In this guide, we’ll break down typical microwave drawer sizes, installation requirements, and how to accurately measure your space for a hassle-free upgrade.
Typical Sharp Microwave Drawer Oven Sizes
Sharp is the original inventor, designer, and manufacturer of built-in Microwave Drawer Ovens, offering a variety of drawer-style models typically in two standard widths:
- 24-Inch Microwave Drawer Ovens
- 30-Inch Microwave Drawer Ovens
Despite the different widths, the interior cooking capacity is often similar, with most models offering 1.2 cubic feet of space, enough to fit a 9” x 13” baking dish or a standard dinner plate with room to spare.
Here’s a breakdown of the typical Sharp Microwave Drawer Oven dimensions:
The 24-inch model (SMD2470ASY) has an overall width of approximately 23.88 inches, while the 30-inch model (SMD3070ASY) measures around 29.88 inches wide. Both models share a consistent height of about 15.88 inches and a depth of roughly 23 inches when closed. When fully extended, the drawer requires approximately 41 inches of clearance in front to open completely.
While the cutout dimensions differ slightly between models, both are engineered to fit standard 24-inch deep base cabinets with minimal adjustments, especially if your cabinetry is already designed for built-in appliances.
Installation and Clearance Requirements
To install a Sharp Microwave Drawer Oven safely and seamlessly, you’ll need to consider the following:
Cabinet Requirements
- Standard base cabinet depth: 24 inches minimum.
- Cabinet width:
- 24-inch drawer: Install in 24-inch-wide base cabinet.
- 30-inch drawer: Install in 30-inch-wide base cabinet.
- Cutout Height: Typically, 14 13/16 inches for both 24” (SMD2470ASY) and 30” (SMD3070ASY) models.
Disclaimer: Cutout dimensions can vary slightly depending on the specific model. Always refer to your Sharp Microwave Drawer Oven’s installation manual or shop.sharpusa.com to confirm the exact requirements for your unit.
Electrical Requirements
- 120V grounded outlet, typically installed in the cabinet behind or beneath the unit.
- Ensure the outlet is accessible after installation (some local codes may require it)
Ventilation & Airflow
Microwave Drawer Ovens are designed to be built-in and typically do not require external ventilation. However, they do need adequate airflow behind and around the unit to prevent overheating. Follow the installation manual for exact clearance requirements.
How to Measure Your Space for a Microwave Drawer Oven
Measuring properly is key to avoiding surprises during installation. Here’s a step-by-step guide:
- Measure Cabinet Width
- Make sure the cabinet matches the drawer size (24″ or 30″).
- Check Cabinet Depth
- The minimum required depth is 24 inches for a proper fit.
- Measure Cutout Dimensions
- Refer to the product’s spec sheet for exact cutout height and width.
- For most Sharp Microwave Drawer Ovens:
- Cutout Width: ~22 1/8″ (24″ model SMD2470ASY) or ~28 7/8″ (30″ model SMD3070ASY)
- Cutout Height: ~14 13/16″
- Cutout Depth: Minimum 23 1/2″
Disclaimer: These dimensions are general guidelines and may vary slightly by model. Always consult your specific model’s installation manual or visit the shop.sharpusa.com to ensure accurate measurements before installation.
- Confirm Drawer Clearance
- Ensure at least 41 inches of open space in front of the unit to fully extend the drawer without obstruction from islands, doors, or other cabinetry.
Microwave Drawer Oven Sizes: What’s Right for Your Kitchen?
While both 24-inch and 30-inch models offer similar cooking capacity, the choice often comes down to cabinetry design and aesthetic preferences.
- Choose a 24-inch model if you’re installing it in a standard cabinet or a compact kitchen.
- Choose a 30-inch model for a more high-end, built-in look that aligns with 30″ ovens and warming drawers.
Tips for a Smooth Installation
- Use the provided installation template to mark and prepare the cutout accurately.
- Hire a professional installer if you’re unsure about cabinetry modifications or electrical wiring.
- Pre-plan drawer clearance if you’re installing near a kitchen island or doorway.
- Secure a power source behind or below the drawer.
Installing a Sharp Microwave Drawer Oven is a stylish and space-saving way to upgrade your kitchen. With standard 24-inch and 30-inch sizes, these models are designed to fit seamlessly into most base cabinets, offering a sleek, built-in look without sacrificing functionality. By understanding the typical Microwave Drawer Oven dimensions and measuring your space carefully, you can ensure a smooth and stress-free installation.
